If you have a PC/Laptop with a 9 pin serial socket then all you need is a Null Modem Cable, see pic below.

 If you have a PC/Laptop that doesn't have the 9 pin serial socket you will need a Null Modem Cable and a USB adapter, See pic below.

If you have a PC and you are struggling with the usb adapter or you have Vista like me you could install a PCI serial card which is easily added to you PC and with this all you need is the null modem cable which gives you a direct link from your box to the pc.

 Download and save both below to your PC/Laptop.

Kryptview Loader is http://silverhaz76.synthasite.com/resources/DownTool_0927.zip

Kryptview Bin / Firmware is http://silverhaz76.synthasite.com/resources/Kryptview_12072009.bin
Run the Loader Pictured below Ref : 1.

Click on the Download button Ref : 2.

 Once you have pressed the download button you will see another box load like below, Ref : 3.

Press open and select the Bin file that you saved to your desktop earlier highlighted in yellow Ref : 4.

 Now turn off your Kryptview, press Start then turn the Kryptview back on. You should now see the firmware starting to load,

 Once done you will see this message,

 Once finished let the box reboot and then your done, congratulations.