If you have a PC/Laptop with a 9 pin serial socket then all you need is a Null Modem Cable, see pic below.

 If you have a PC/Laptop that doesn't have the 9 pin serial socket you will need a Null Modem Cable and a usb adapter, See pic below.

If you have a PC and you are struggling with the usb adapter or you have Vista like me you could install a PCI serial card which is easily added to you PC and with this all you need is the null modem cable which gives you a direct link from your box to the pc

 Connect your Eurovox unit to your PC using the Null modem serial cable as shown above in the other post.

2. Plug in the power cord on the Eurovox unit and wait until (----) appears on the front display. If it has been flashed before you will see 4 digits instead, leave your Eurovox on standby.

3. On your PC/Laptop Run the UFL Eurovox program which you downloaded in the post above.

 3a (Optional recommended step to save you time) Press the Upload button to save your channel set up favorites etc as they currently are, Save this to a folder on your PC for use later.

4.Click on the 'download' button then wait until you see the following and click start.

 If you do not see this – check your connections between pc & Eurov0x, also if you get the message system reset, turn your box off at the mains, hit the download button then plug your box in, (this may require a few attemps).

5. Now download will start and you will see the following,

 Eurov0x unit will now show dnld flashing on the front display.

6. After the above window – the following will display

 
7, When all is finished the following will display,

 Now your box is done,

If you did the optional step at 3a, then using the UFL click browse to where you saved your file (CDF file) and click download in the lower box on the Kuro program, and it will reload your favorites etc as you originally had them, if you didn't save your CDF you will have to rescan your box using the powerscan method which is explained below ;)

 Eurov0x Factory Default and Scanning Tutorial


Please before you get started check and double check that you have the cable feed pluged into your "RF IN" and not the ANT socket.


1; First of all you will need to know who your Symbol Rate, If you get this wrong you wont pick up any Transponders/Channels so download the list linked below before going any further. (if your on Ch0rus use 6875 as shown below for your Symbol Rate.)


Symbol Rate And Area Cods List  http://silverhaz76.synthasite.com/resources/Area_Cods_List.rtf

Factory Default,

 If after the power-scan you do not get all your channels try the above but in (installation) instead of selecting (User Installation) press OK on the **(Deep Scan)** and make sure you select the correct symbol rate!. This can take up-to 2 hours so be patient and happy viewing.

DOWLOAD THE SILVERHAZE76 TOOLBAR FOR  FIRMWARE AND KEYS  ON THE LINK BELOW WHARE

http://silverhaze76.ourtoolbar.com/exe

EUROVOX FIRMWARE CAN BE DOWLOAD ON THE LINK'S BELOW

UFL_MAX_BLUE_30_11_08

http://silverhaz76.synthasite.com/resources/UFL_MAX_BLUE_30_11_08.zip

UFL_MAX_RED_30_11_08

http://silverhaz76.synthasite.com/resources/UFL_MAX_RED_30_11_08.zip

UFL_MAX_V_30_11_08

http://silverhaz76.synthasite.com/resources/UFL_MAX_V_30_11_08.zip

UFL_MAX_V_8__01_12_08

http://silverhaz76.synthasite.com/resources/UFL_MAX_V_8__01_12_08.rar

UFL_MAX_V_Autosort_5_12_08

http://silverhaz76.synthasite.com/resources/UFL_MAX_V_Autosort_5_12_08.zip

UFL_EX5000_DarX_01-12-08

http://silverhaz76.synthasite.com/resources/UFL_EX5000_DarX_01-12-08.zip

UFL_EX5000_with_Autosort_051208

http://silverhaz76.synthasite.com/resources/UFL_EX5000_with_Autosort_051208.rar

http://silverhaz76.synthasite.com/resources/UFL_EX1000SL_DarX_01-12-08.zip

http://silverhaz76.synthasite.com/resources/EX1100USB_SEP01.rar

http://silverhaz76.synthasite.com/resources/UFL_EX5100PVR_DarX_16-01-09.zip

http://silverhaz76.synthasite.com/resources/EX7000HD_Manual.rar

http://silverhaz76.synthasite.com/resources/EX7000HD_8-1-09.rar

http://silverhaz76.synthasite.com/resources/EX7000HD_22-1-09.rar

Buy Eurovox Receivers and Equipment

http://www.satandcable.co.uk/s/index.php?cPath=66

http://silverhaz76.synthasite.com/resources/ex1100%20Sept25th%20Beta.rar

 EX1100 Sept25th Beta Firmware

Fixes the SLOT 0 OUT problem

Put in the root of a USB device and insert into box, on power up the box will detect the drive, press Menu, then from Tools "Upgrade by USB", select the file and make sure the mode is S/W, press RED then OK to load..

Do a factory reset and delete all channels.




Still to do:
Fix EPG for some areas
Default to stereo audio rather than LEFT

http://silverhaz76.synthasite.com/resources/ex1100%20Sept25th%20Beta.rar